AD SPACE
AD Space

Thursday, 31 July 2014

// //

T805XXU1ANFB Android 4.4.2 KitKat Firmware For Galaxy Tab S 10.5 (LTE) SM-T805 - How To Guide

Download T805XXU1ANFB Android 4.4.2 KitKat latest firmware for SM-T805, available since 01-August-2014. Install XXU1ANFB Android 4.4.2 KitKat official firmware update on Samsung Galaxy Tab S 10.5 (LTE) SM-T805 that rolled out in various countries including France, Germany, Australia, Netherlands, New Zealand, Spain, Nordic countries, Poland, Switzerland, Russia, Open Austria, Singapore and United Kingdom; and can also be downloaded for a manual update. This new firmware update only fixes existing issues and in hence overall performance. Continue reading this guide to learn how to get official stock T805XXU1ANFB Android 4.4.2 KitKat firmware running on Galaxy Tab S 10.5 (LTE) SM-T805. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

T805XXU1ANFB Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T805XXU1ANFB Android 4.4.2 KitKat firmware on Galaxy Tab S 10.5 (LTE) SM-T805 manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy Tab S 10.5 (LTE) SM-T805



Warning: This tutorial is only for Galaxy Tab S 10.5 (LTE) SM-T805. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab S 10.5 (LTE) SM-T805 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab S 10.5 (LTE) SM-T805. [Guide].

How To Update Galaxy Tab S 10.5 (LTE) SM-T805 via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab S 10.5 (LTE) SM-T805 via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* T805XXU1ANFB Stock Firmware List Last Updated On August 01, 2014. 

T805XXU1ANFB Android 4.4.2 KitKat Firmware Downloads

Switzerland: AUT-T805XXU1ANFB-20140729142536.zip | Alternate Download Link

Hungary: XEH-T805XXU1ANFB-20140726100307.zip | Alternate Download Link

Czech Republic: XEZ-T805XXU1ANFB-20140726103540.zip | Alternate Download Link

United Kingdom: BTU-T805XXU1ANFB-20140722141042.zip | Alternate Download Link

Germany: DBT-T805XXU1ANFB-20140708094301.zip | Alternate Download Link

[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install T805XXU1ANFB Android 4.4.2 KitKat On Galaxy Tab S 10.5 (LTE) SM-T805 Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab S 10.5 (LTE) SM-T805  in Download Mode by pressing and holding down the Volume Down button and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab S 10.5 (LTE) SM-T805 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab S 10.5 (LTE) SM-T805 to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Tab S 10.5 (LTE) SM-T805

If Galaxy Tab S 10.5 (LTE) SM-T805 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More
// //

I9506XXUCNG3 Android 4.4.2 KitKat Firmware For Galaxy S4 LTE GT-I9506 - How To Guide

Download I9506XXUCNG3 Android 4.4.2 KitKat latest firmware for GT-I9506, available since 01-August-2014. Install XXUCNG3 Android 4.4.2 KitKat official firmware update on Samsung Galaxy S4 LTE GT-I9506 that rolled out in various countries including New Zealand, Nordic countries and France; and can also be downloaded for a manual update. This new firmware update help you to upgrade your Galaxy S4 LTE GT-I9506 from Android 4.3 Jelly Bean to Android 4.4.2 KitKat. Continue reading this guide to learn how to get official stock I9506XXUCNG3 Android 4.4.2 KitKat firmware running on Galaxy S4 LTE GT-I9506. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

Related Readings:
I9506XXUCNG3 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash I9506XXUCNG3 Android 4.4.2 KitKat firmware on Galaxy S4 LTE GT-I9506 manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy-S4-I9506-Firmware-Updates 
Warning: This tutorial is only for Galaxy S4 LTE GT-I9506. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 LTE GT-I9506 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 LTE GT-I9506. [Guide].

How To Update Galaxy S4 LTE GT-I9506 via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy S4 LTE GT-I9506 via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* I9506XXUCNG3 Stock Firmware List Last Updated On August 01, 2014. 

I9506XXUCNG3 Android 4.4.2 KitKat Firmware Downloads

New Zealand (Vodafone): VNZ-I9506XXUCNG3-20140731195016.zip | Terafile Mirror

Nordic countries: NEE-I9506XXUCNG3-20140726162945.zip | Terafile Mirror

France (Orange): FTM-I9506XXUCNG3-20140725170203.zip | Terafile Mirror

[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install I9506XXUCNG3 Android 4.4.2 KitKat On Galaxy S4 LTE GT-I9506 Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy S4 LTE GT-I9506 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy S4 LTE GT-I9506 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy S4 LTE GT-I9506 to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy S4 LTE GT-I9506

If Galaxy S4 LTE GT-I9506 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More
// //

S5310IDXU0ANG2 Android 4.4.2 KitKat Firmware For Galaxy Pocket Neo GT-S5310I - How To Guide

Download S5310IDXU0ANG2 Android 4.4.2 KitKat latest firmware for GT-S5310I, available since 01-August-2014. Install DXU0ANG2 Android 4.4.2 KitKat official firmware update on Samsung Galaxy Pocket Neo GT-S5310I that rolled out in various countries including Malaysia; and can also be downloaded for a manual update. This new firmware update only brings bug fixes and performance tweaks on your Galaxy Pocket Neo GT-S5310I if you already running on Android 4.4.2 KitKat. Continue reading this guide to learn how to get official stock S5310IDXU0ANG2 Android 4.4.2 KitKat firmware running on Galaxy Pocket Neo GT-S5310I. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

S5310IDXU0ANG2 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash S5310IDXU0ANG2 Android 4.4.2 KitKat firmware on Galaxy Pocket Neo GT-S5310I manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy Pocket Neo
 
Warning: This tutorial is only for Galaxy Pocket Neo GT-S5310I. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Pocket Neo GT-S5310I in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Pocket Neo GT-S5310I. [Guide].

How To Update Galaxy Pocket Neo GT-S5310I via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Pocket Neo GT-S5310I via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* S5310IDXU0ANG2 Stock Firmware List Last Updated On August 01, 2014. 

S5310IDXU0ANG2 Android 4.4.2 KitKat Firmware Downloads

Malaysia: XME-S5310IDXU0ANG2-20140729104800.zip

[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install S5310IDXU0ANG2 Android 4.4.2 KitKat On Galaxy Pocket Neo GT-S5310I Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Pocket Neo GT-S5310I in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Pocket Neo GT-S5310I will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Pocket Neo GT-S5310I to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Pocket Neo GT-S5310I

If Galaxy Pocket Neo GT-S5310I stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More
// //

T111MUBUANG1 Android 4.2.2 JB Firmware For Galaxy Tab 3 Lite SM-T111M - How To Guide

Download T111MUBUANG1 Android 4.2.2 Jelly Bean latest firmware for SM-T111M, available since 01-August-2014. Install UBUANG1 Android 4.2.2 Jelly Bean official firmware update on Samsung Galaxy Tab 3 Lite SM-T111M that rolled out in various countries including Panama and Trinidad & Tobago; and can also be downloaded for a manual update. This new firmware update only brings bug fixes and performance tweaks on your Galaxy Tab 3 Lite SM-T111M. Continue reading this guide to learn how to get official stock T111MUBUANG1 Android 4.2.2 Jelly Bean firmware running on Galaxy Tab 3 Lite SM-T111M. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

T111MUBUANG1 Android 4.2.2 Jelly Bean stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T111MUBUANG1 Android 4.2.2 Jelly Bean firmware on Galaxy Tab 3 Lite SM-T111M manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy-Tab-3-Lite

Warning: This tutorial is only for Galaxy Tab 3 Lite SM-T111M. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab 3 Lite SM-T111M in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab 3 Lite SM-T111M. [Guide].

How To Update Galaxy Tab 3 Lite SM-T111M via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab 3 Lite SM-T111M via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* T111MUBUANG1 Stock Firmware List Last Updated On August 01, 2014. 

T111MUBUANG1 Android 4.2.2 Jelly Bean Firmware Downloads

Panama: TPA-T111MUBUANG1-20140801113432.zip

Trinidad & Tobago: T111MUBUANG1_T111MUUBANG1_TTT.zip

[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install T111MUBUANG1 Android 4.2.2 Jelly Bean On Galaxy Tab 3 Lite SM-T111M Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab 3 Lite SM-T111M in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab 3 Lite SM-T111M will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab 3 Lite SM-T111M to Android 4.2.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Tab 3 Lite SM-T111M

If Galaxy Tab 3 Lite SM-T111M stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.2.2 Jelly Bean experience.
Read More
// //

T235XXU1ANG5 Android 4.4.2 KitKat Firmware For Galaxy Tab 4 7.0 (LTE) SM-T235 - How To Guide

Download T235XXU1ANG5 Android 4.4.2 KitKat latest firmware for SM-T235, available since 01-August-2014. Install XXU1ANG5 Android 4.4.2 KitKat official firmware update on Samsung Galaxy Tab 4 7.0 (LTE) SM-T235 that rolled out in various countries including Kazakhstan and Nordic countries; and can also be downloaded for a manual update. This new firmware update only fixes existing issues and in hence overall performance. Continue reading this guide to learn how to get official stock T235XXU1ANG5 Android 4.4.2 KitKat firmware running on Galaxy Tab 4 7.0 (LTE) SM-T235. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

T235XXU1ANG5 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T235XXU1ANG5 Android 4.4.2 KitKat firmware on Galaxy Tab 4 7.0 (LTE) SM-T235 manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy Tab 4 7.0 (LTE) SM-T235
Warning: This tutorial is only for Galaxy Tab 4 7.0 (LTE) SM-T235. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab 4 7.0 (LTE) SM-T235 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab 4 7.0 (LTE) SM-T235. [Guide].

How To Update Galaxy Tab 4 7.0 (LTE) SM-T235 via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab 4 7.0 (LTE) SM-T235 via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* T235XXU1ANG5 Stock Firmware List Last Updated On August 01, 2014. 

T235XXU1ANG5 Android 4.4.2 KitKat Firmware Downloads

Kazakhstan: SKZ-T235XXU1ANG5-20140801113642.zip | Alternate Download Link

Finland: NEE-T235XXU1ANG5-20140731142314.zip | Alternate Download Link
 
[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install T235XXU1ANG5 Android 4.4.2 KitKat On Galaxy Tab 4 7.0 (LTE) SM-T235 Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab 4 7.0 (LTE) SM-T235 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab 4 7.0 (LTE) SM-T235 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab 4 7.0 (LTE) SM-T235 to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Tab 4 7.0 (LTE) SM-T235

If Galaxy Tab 4 7.0 (LTE) SM-T235 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More
// //

T231XXU0ANG1 Android 4.4.2 KitKat Firmware For Galaxy Tab 4 7.0 (3G) SM-T231 - How To Guide

Download T231XXU0ANG1 Android 4.4.2 KitKat latest firmware for SM-T231, available since 01-August-2014. Install XXU0ANG1 Android 4.4.2 KitKat official firmware update on Samsung Galaxy Tab 4 7.0 (3G) SM-T231 that rolled out in various countries including Ukraine, Uzbekistan, Russia, India and Colombia; and can also be downloaded for a manual update. This new firmware update only fixes existing issues and in hence overall performance. Continue reading this guide to learn how to get official stock T231XXU0ANG1 Android 4.4.2 KitKat firmware running on Galaxy Tab 4 7.0 (3G) SM-T231. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

T231XXU0ANG1 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T231XXU0ANG1 Android 4.4.2 KitKat firmware on Galaxy Tab 4 7.0 (3G) SM-T231 manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy Tab 4 7.0 (3G) SM-T231


Warning: This tutorial is only for Galaxy Tab 4 7.0 (3G) SM-T231. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab 4 7.0 (3G) SM-T231 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab 4 7.0 (3G) SM-T231. [Guide].

How To Update Galaxy Tab 4 7.0 (3G) SM-T231 via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab 4 7.0 (3G) SM-T231 via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* T231XXU0ANG1 Stock Firmware List Last Updated On August 01, 2014. 

T231XXU0ANG1 Android 4.4.2 KitKat Firmware Downloads

Russia: SER-T231XXU0ANG1-20140729102029.zip | Terafile Mirror

Uzbekistan: CAC-T231XXU0ANG1-20140729095540.zip | Terafile Mirror

Ukraine (Kyivstar): SEK-T231XXU0ANG1-20140729095620.zip | Terafile Mirror

Colombia (Movistar): COB-T231XXU0ANG1-20140723165715.zip | Terafile Mirror

India: T231XXU0ANG1_T231ODD0ANF3_INU.zip | Terafile Mirror
 
[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install T231XXU0ANG1 Android 4.4.2 KitKat On Galaxy Tab 4 7.0 (3G) SM-T231 Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab 4 7.0 (3G) SM-T231 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab 4 7.0 (3G) SM-T231 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab 4 7.0 (3G) SM-T231 to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Tab 4 7.0 (3G) SM-T231

If Galaxy Tab 4 7.0 (3G) SM-T231 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More
// //

G800FXXU1ANG7 Android 4.4.2 KitKat Firmware For Galaxy S5 Mini SM-G800F - How To Guide

Download G800FXXU1ANG7 Android 4.4.2 KitKat latest firmware for SM-G800F, available since 01-August-2014. Install XXU1ANG7 Android 4.4.2 KitKat official firmware update on Samsung Galaxy S5 Mini SM-G800F that rolled out in various countries including Hungary, Switzerland, Poland, Bulgaria, Nordic countries, Open Austria, Germany, United Kingdom and Spain; and can also be downloaded for a manual update. This new firmware update only brings bug fixes and performance tweaks on your Galaxy S5 Mini SM-G800F if you already running on Android 4.4.2 KitKat. Continue reading this guide to learn how to get official stock G800FXXU1ANG7 Android 4.4.2 KitKat firmware running on Galaxy S5 Mini SM-G800F. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

G800FXXU1ANG7 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash G800FXXU1ANG7 Android 4.4.2 KitKat firmware on Galaxy S5 Mini SM-G800F manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy S5 Mini
 
Warning: This tutorial is only for Galaxy S5 Mini SM-G800F. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S5 Mini SM-G800F in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S5 Mini SM-G800F. [Guide].

How To Update Galaxy S5 Mini SM-G800F via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy S5 Mini SM-G800F via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* G800FXXU1ANG7 Stock Firmware List Last Updated On August 1, 2014. 

G800FXXU1ANG7 Android 4.4.2 KitKat Firmware Downloads

Switzerland: AUT-G800FXXU1ANG7-20140728100207.zip
 
[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install G800FXXU1ANG7 Android 4.4.2 KitKat On Galaxy S5 Mini SM-G800F Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy S5 Mini SM-G800F in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy S5 Mini SM-G800F will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy S5 Mini SM-G800F to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy S5 Mini SM-G800F

If Galaxy S5 Mini SM-G800F stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
Read More

Monday, 21 July 2014

// //

Install Android 4.4.4 KitKat on AT&T HTC One (2013) via Omni ROM - How To Guide

Android 4.4.4 KitKat now officially available for various devices. However, if you looking for something more customize then try out Omni ROM. The recently nightly of Omni ROM is based on Android 4.4.4 KitKat and fully support AT&T HTC One (2013). It mean by installing Omni 4.4.4 KitKat ROM you not only enjoy latest Android 4.4.4 KitKat features but also various Omni ROM features including multi-window and multi-tasking. If your device running on Android 4.4.2 KitKat, its always a better idea to update it to latest Android 4.4.4 KitKat since its more secure and bug free. The good thing about nightly build is, it updated daily with more features and improvements. The latest Omni nightly also improve battery life. You can download and install custom firmware Omni nightly on your AT&T HTC One (2013). Since, AT&T HTC One (2013) is capable enough to run Android 4.4.4 KitKat smoothly, Omni nightly going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.4 KitKat based Omni nightly custom ROM on AT&T HTC One (2013).

Related Readings:
Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Omni ROM 4.4.4 KitKat

Warning!
 
This tutorial is only for AT&T HTC One (2013). Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for AT&T HTC One (2013) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and AT&T HTC One (2013). [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni nightly ROM on AT&T HTC One (2013).

File Required(Download by clicking on it)
  1. Omni nightly For AT&T HTC One (2013)   [Filename: omni-4.4.4-20140718-m7att-NIGHTLY.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
  3. SuperSU [Filename: UPDATE-SuperSU-v2.01.zip]

How to Install Android 4.4.4 KitKat based Omni nightly ROM on AT&T HTC One (2013)

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T HTC One (2013).
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the Omni nightly Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package. 
  8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.01.zip file instead of ROM zip to root your device.
  9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your AT&T HTC One (2013) and boot up into Android 4.4.4 KitKat ROM Omni nightly
  10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T HTC One (2013).
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Nightly Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.01.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your AT&T HTC One (2013) and boot up into Android 4.4.4 KitKat ROM Omni nightly.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni nightly is now installed and running on your AT&T HTC One (2013).
Read More
// //

Install Android 4.4.4 KitKat on HTC One (2013) via Omni ROM - How To Guide

Android 4.4.4 KitKat now officially available for various devices. However, if you looking for something more customize then try out Omni ROM. The recently nightly of Omni ROM is based on Android 4.4.4 KitKat and fully support HTC One (2013). It mean by installing Omni 4.4.4 KitKat ROM you not only enjoy latest Android 4.4.4 KitKat features but also various Omni ROM features including multi-window and multi-tasking. If your device running on Android 4.4.2 KitKat, its always a better idea to update it to latest Android 4.4.4 KitKat since its more secure and bug free. The good thing about nightly build is, it updated daily with more features and improvements. The latest Omni nightly also improve battery life. You can download and install custom firmware Omni nightly on your HTC One (2013). Since, HTC One (2013) is capable enough to run Android 4.4.4 KitKat smoothly, Omni nightly going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.4 KitKat based Omni nightly custom ROM on HTC One (2013).

Related Readings:
Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Omni ROM 4.4.4 KitKat

Warning!
 
This tutorial is only for HTC One (2013). Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for HTC One (2013) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and HTC One (2013). [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni nightly ROM on HTC One (2013).

File Required(Download by clicking on it)
  1. Omni nightly For HTC One (2013)   [Filename: omni-4.4.4-20140718-m7ul-NIGHTLY.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
  3. SuperSU [Filename: UPDATE-SuperSU-v2.01.zip]

How to Install Android 4.4.4 KitKat based Omni nightly ROM on HTC One (2013)

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One (2013).
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the Omni nightly Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package. 
  8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.01.zip file instead of ROM zip to root your device.
  9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your HTC One (2013) and boot up into Android 4.4.4 KitKat ROM Omni nightly
  10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One (2013).
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Nightly Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.01.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your HTC One (2013) and boot up into Android 4.4.4 KitKat ROM Omni nightly.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni nightly is now installed and running on your HTC One (2013).
Read More

Saturday, 19 July 2014

// //

Install Android 4.4.4 KitKat on Galaxy Tab 7 P1000 via Omni ROM - How To Guide

Android 4.4.4 KitKat now officially available for various devices. However, if you looking for something more customize then try out Omni ROM. The recently nightly of Omni ROM is based on Android 4.4.4 KitKat and fully support Galaxy Tab 7 P1000. It mean by installing Omni 4.4.4 KitKat ROM you not only enjoy latest Android 4.4.4 KitKat features but also various Omni ROM features including multi-window and multi-tasking. If your device running on Android 4.4.2 KitKat, its always a better idea to update it to latest Android 4.4.4 KitKat since its more secure and bug free. The good thing about nightly build is, it updated daily with more features and improvements. The latest Omni nightly also improve battery life. You can download and install custom firmware Omni nightly on your Galaxy Tab 7 P1000. Since, Galaxy Tab 7 P1000 is capable enough to run Android 4.4.4 KitKat smoothly, Omni nightly going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.4 KitKat based Omni nightly custom ROM on Galaxy Tab 7 P1000.

Related Readings:
Please note, this nightly build is still under development and hence, you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable build.

Omni ROM 4.4.4 KitKat

Warning!
 
This tutorial is only for Galaxy Tab 7 P1000. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab 7 P1000 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab 7 P1000. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.4 KitKat based Omni nightly ROM on Galaxy Tab 7 P1000.

File Required(Download by clicking on it)
  1. Omni nightly For Galaxy Tab 7 P1000   [Filename: omni-4.4.4-20140718-p1-NIGHTLY.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.4_signed.zip] or any other 4.4 KitKat GApps
  3. SuperSU [Filename: UPDATE-SuperSU-v2.01.zip]

How to Install Android 4.4.4 KitKat based Omni nightly ROM on Galaxy Tab 7 P1000

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy Tab 7 P1000.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the Omni nightly Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.4_signed.zip file instead of ROM zip to install the Google apps package. 
  8. Once installation process end, repeat the step 6 but choose the UPDATE-SuperSU-v2.01.zip file instead of ROM zip to root your device.
  9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Tab 7 P1000 and boot up into Android 4.4.4 KitKat ROM Omni nightly
  10. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Galaxy Tab 7 P1000.
  3. Now, Boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Omni Nightly Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.4_signed.zip and UPDATE-SuperSU-v2.01.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Tab 7 P1000 and boot up into Android 4.4.4 KitKat ROM Omni nightly.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.4 KitKat firmware based custom ROM Omni nightly is now installed and running on your Galaxy Tab 7 P1000.
Read More
AD SPACE